From In-Portal Developers Guide

Current revision

What Are Braces Behind Teeth And Who Would Need Them?

Braces are designed for correcting crooked teeth; however, many individuals opt not to have archwires/metal wires being placed across their teeth. Because of this, braces behind teeth also known as lingual braces-behind-teeth.com, were made to take care of this concern. Braces behind teeth allow it to be tough to notice when a person is undergoing through this sort of dental treatment. The cause of braces behind teeth is traced back in 1970s when orthodontists in Japan and US worked separately in formulation of their very own manner of lingual braces. We've got the technology of lingual braces was basically introduced in 1979 to American orthodontics offices, however, this kind of braces did not gained popularity in the initial years, until improved technology provided better maintenance and installing braces behind teeth.

Which patient constitutes a good candidate for braces behind teeth? Don't assume all individual is able to make a good candidate for these braces, normally, teenager's adults and adults are recommended because of this treatment option. And also the height and width of your teeth maters a lot because it is strongly suggested for all those patients having relatively normal sized teeth instead of small-sized teeth. The candidate should also come with an accommodating bite relationship to the lingual braces presence, as existence of deep vertical overbite (excessive overlapping of teeth) or using an alignment that may exert heavy forces about the orthodontic brackets particularly when chewing, aren't recommended for braces behind teeth.

What's the technology associated with braces behind teeth? According to the research, we now have that lies behind this dental procedure is incredibly complicated in this brackets and wires combined with braces behind teeth are custom-fabricated for each patient utilizing a robotic wire bending and Cam, Cad technology.

Is there a PROCESS Related to GETTING BRACES BEHIND TEETH?

The procedure for placing braces behind teeth involves three major steps i.e.

Taking impression in the tooth Since the wires and brackets used allow me to share customized, the process comments if you take of very precise or exact impression of the patient`s teeth i.e. both upper and lower sides which are then sent, with the dentist's prescription on the desired final teeth alignment, on the dental or orthodontic laboratory to blame for making lingual braces hardware.

Fabrication with the lingual braces hardware by the dental laboratory Here, tooth plaster casts are made out from the teeth impression received from the dentist, then this set up for your patient`s case is made from these plaster casts depending on the orthodontist`s prescriptions. A setup is simply mockup with the teeth usually arranged inside a precise/perfect manner. Following your finishing of the setup, the next thing involves scanning it in a computer to obtain a digitalized information that's then found in designing and creating (cam or cad technology) the customized group of archwires and orthodontic brackets essential for the process (robotic wire bending technology). When fabrication is completed, embedding in the orthodontics brackets in a tray called an applicator tray is performed. Normally an applicator tray fits on the teeth and helps in holding the brackets in actual alignment through the technique employed to fix them. When all this is done, the orthodontic hardware will be repaid for the dentist`s office.

Attaching braces behind teeth Normally, an appointment is created where the patient returns on the orthodontist`s office for that attachment of lingual braces which usually occurs about 4 weeks as soon as the impressions were first obtained. Within this step, braces behind teeth are attached by application of cement at the back of every bracket therefore the applicator tray is pressed in order to hold these brackets in place in the teeth (which means that all brackets within one arch are bonded or cemented into position at the same time). The applicator tray makes certain that each bracket stays in precise alignment when its cement sets. Following the establishing with the cement, the applicator tray is broken away with the dentist hence making the brackets to remain set up on the patient`s teeth. Trimming and smoothening associated with a excess cement is carried out. The past step involves installation of the pre-bend archwires cooked by the dental laboratory soon after securing from the brackets after which it the braces behind teeth are considered in place as well as the patient is termed as undergoing active treatment.