From In-Portal Developers Guide

Current revision

What exactly are Braces Behind Teeth And Who Need Them?

Braces are aimed at correcting crooked teeth; however, lots of people opt not to have archwires/metal wires being placed across their teeth. That is why, braces behind teeth also called lingual [www.braces-behind-teeth.com http://www.braces-behind-teeth.com], were created to take care of this problem. Braces behind teeth help it become tough to notice when someone is undergoing through such a dental care. The foundation of braces behind teeth is traced back in 1970s when orthodontists in Japan and US worked separately in formulation of their very own technique of lingual braces. The technology of lingual braces was first introduced in 1979 to American orthodontics offices, however, this type of braces still did not gain popularity during the first couple of years, until improved technology provided better maintenance and installing of braces behind teeth.

Which patient constitutes a good candidate for braces behind teeth? Its not all individual is able to make a great candidate for these braces, normally, teenager's adults and adults are suggested because of this treatment option. And also the height and width of one's teeth maters a whole lot as it is strongly recommended for the people patients having relatively normal sized teeth instead of small-sized teeth. The candidate should also offer an accommodating bite relationship towards the lingual braces presence, as information on deep vertical overbite (excessive overlapping of teeth) or using an alignment that could exert heavy forces around the orthodontic brackets particularly if chewing, are certainly not recommended for braces behind teeth.

What's the technology related to braces behind teeth? Based on the research, the technology that lies behind this dental procedure is quite complicated for the reason that brackets and wires used with braces behind teeth are custom-fabricated for each and every patient using a robotic wire bending and Cam, Cad technology.

WHAT IS THE PROCESS Related to GETTING BRACES BEHIND TEETH?

The process for putting braces behind teeth involves three major steps i.e.

Taking impression with the tooth Because the wires and brackets used here are tailor made, the process comments by taking of very precise or exact impression in the patient`s teeth i.e. both lower and upper sides that happen to be then sent, along with the dentist's prescription around the desired final teeth alignment, for the dental or orthodontic laboratory accountable for making lingual braces hardware.

Fabrication with the lingual braces hardware from the dental laboratory Here, your teeth plaster casts are produced out of the teeth impression caused by the dentist, a build for that patient`s case is produced from these plaster casts as per the orthodontist`s prescriptions. A setup is only a mockup from the teeth usually arranged within a precise/perfect manner. Following the finishing the setup, the next thing involves scanning it in a computer to secure a digitalized information which is then employed in designing and creating (cam or cad technology) the customized compilation of archwires and orthodontic brackets essential for the process (robotic wire bending technology). When fabrication is finished, embedding of the orthodontics brackets in to a tray called an applicator tray is conducted. Normally an applicator tray fits in the teeth so it helps in holding the brackets in actual alignment through the technique used to fix them. When pretty much everything is complete, the orthodontic hardware will then be returned to the dentist`s office.

Attaching braces behind teeth Normally, a meeting is made the place that the patient returns for the orthodontist`s office for that attachment of lingual braces which in turn occurs about A month after the impressions were first obtained. With this step, braces behind teeth are attached by putting on cement at the rear of every bracket and therefore the applicator tray is pressed so that you can hold these brackets in place on the teeth (and therefore all brackets contained in one arch are bonded or cemented in place simultaneously). The applicator tray ensures that each bracket stays in precise alignment when its cement sets. Following your establishing in the cement, the applicator tray is broken away through the dentist hence making the brackets to keep available on the patient`s teeth. Trimming and smoothening of the excess cement is conducted. The last step involves installing of the pre-bend archwires prepared by the dental laboratory soon after securing with the brackets and the braces behind teeth are viewed available as well as the patient is referred to as as undergoing active treatment.